AC510: How to connect a replacement Parent and/or Camera Unit to your existing Monitor

Connecting replacement Parent Unit:

1. Firstly, remove the battery from the the original Parent Unit
2. Switch ON the Camera Unit & replacement Parent Unit and press the settings icon on the Parent Unit screen
3. Press the + for camera 1, this will now turn blue
4. Whilst the + icon is still blue press the Pairing Button on the top of the Camera Unit for 2-4 seconds and release
5. The + icon in camera 1 will now show as a red bin icon to show pairing is complete

You can also follow this video: https://www.youtube.com/watch?v=ilZU1Gd82Fs

Connecting replacement Camera Unit:

Firstly, you will need to delete the original Camera Unit from the monitor:

1. Switch on the original Camera & Parent Unit
2. Tap the Settings Icon to open the Pairing Screen
3. Press the red bin for camera 1 and a red tick will show next to the red bin 
4. Press the tick and the red bin will be replaced with a blue +
5. Power OFF the original Camera & Parent Units
6. Switch on the Parent Unit
7. Tap the Settings Icon in the Parent Unit screen to open the Pairing screen
8. Press the + for camera 1, this will now turn blue
9. Switch on the replacement Camera Unit
10. Whilst the + icon is still blue press the Pairing Button on the top of the Camera Unit for 2-4 seconds and release
11. The + icon in camera 1 will now show as a red bin icon to show pairing is complete

If you can't remove cam 1, the video might help you: https://www.youtube.com/watch?v=JV_zRpT0XHc