AC115: How to: connect a replacement Parent and/or Nursery Unit to your existing Monitor

AC115 - How to Connect your Parent Unit and/or Nursery Unit - whichever is replaced:

1. Turn Parent Unit and Nursery Unit OFF.
   • You can put aside the defective unit, you won't need it anymore.
2. Turn Nursery Unit ON.
3. Press the Power ON/OFF button on the Nursery Unit 4 consecutive times.
   • The Sensor Pad Indicator Light on the Nursery Unit will flash quickly in green (indicates Nursery Unit is in linking mode).
4. Turn the Parent Unit ON. The Out-of-Range icon should blink.
5. Press and hold the Talk Back button on the Parent Unit until a beep tone is heard.
6. Press OK button on the Parent Unit.
   • The Out-of-Range icon should blink faster to indicate that the Parent Unit is in linking mode.

The Parent Unit will display H1-H2 icon during the reconnection procedure. The reconnection is successful if the Parent unit shows the regular screen view.