AC127::How to reconnect the original / replacement Parent & Nursery Units

In the case of loss of connectivity between the Parent & Nursery Unit, the first step is to bring them closer together and make sure that both units are powered ON

If there is still no connection and no out-of-range warning after the above has been done, then and only then should the following reconnection procedure be done

1. Switch both Units OFF
2. Switch the Nursery Unit ON
3. Press the Power ON/OFF button on the Nursery Unit 4 times 

The Sensor Pad Indicator Light on the Nursery Unit will flash green - this indicates Nursery Unit is in linking mode

4. Turn the Parent Unit ON and the Out-of-range icon will flash - this indicates Nursery Unit is in pairing / connecting mode
5. Press and hold the Talk Back button on the Parent Unit until a single beep is heard from the Parent Unit
6. Press OK button on the Parent Unit - the Out-of-Range icon should flash faster to indicate that the Parent Unit is in linking mode