AC127: Loss of connection between the Sensor Pad & the Nursery Unit

If you cannot see the Sensor Pad icon on the Parent Unit display this can indicate that the Sensor Pad & Nursery Unit have lost connection

Firstly - bring the Sensor Pad and Nursery Unit closer together and make sure that the Nursery & Parent Units are ON and the battery is inserted in the Sensor Pad to restore the connection.

If there is still no connection after trying the above, then and only then should the following reconnection procedure below be carried out.

IMPORTANT: If you have more than 1 wireless Sensor Pad they must be in separate rooms during the reconnection procedure.

Switch the Nursery and Parent Units OFF

Remove and replace the battery from the Sensor Pad

Switch the Nursery Unit ON 

Press and hold the Pause button on the Nursery Unit for 3 seconds
      At this point the Sensor Pad indicator Light of the Nursery Unit will flash blue

   

The reconnection should be completed within 30 seconds
     When successful the Nursery Unit will sound a confirmation tone