AC527 & AC507:ACAM2:Adding the 2nd Sensor Pad

Please note that this advice is for adding the additional Sensor Pad included with ACAM2.

In order to add the 2nd Sensor Pad you MUST have an additional Nursery/Camera Unit and this MUST be connected to your existing Parent Unit first:

How to connect the additional Nursery/Camera Unit: 

https://angelcareuk.zendesk.com/hc/en-gb/articles/1500002605521-AC527-How-can-I-add-the-second-Nursery-Unit-

ACAM2: 

https://angelcarebaby.com/uk_en/angelcare-acam2-extra-movement-sensor-pad-nursery-unit 

Place both Sensor Pads in close proximity to the Parent & Nursery/Camera Units to assist connection

1. Remove the batteries from the original and replacement Sensor Pad

2. Select Nursery/Camera Unit 2 in the view mode - NOTE when CAM2 is selected this shows in the toolbar on the Parent Unit - if not, you cannot complete the connection process

3. Press the General setting menu icon

4. Press the Pairing Icon

5. In the Pairing Menu, Press the Sensor Pad 2 Icon

6. Insert the battery into the Sensor Pad 2 (the new additional Sensor Pad). It will automatically activate it

           If the connection fails, the Red Failed Pairing Icon will appear on the screen and will need to reattempt pairing

7. If the connection is successful, the Green Successful Pairing Icon will show on the Parent Unit screen and the menu will show the OK Paired Icon

8. You can now re-insert the battery in your original Sensor Pad 

To view a brief video showing these steps see the following link:

https://www.youtube.com/watch?v=NKi3kwAUhO0&list=PLSUHQtx3QKlc6XsOTR9LGB2KjlPPsbfdE&index=13