Connect the Sensor Pad to the Camera Unit using the splitter cable that is included with the retail box - this must be done to activate/deactivate the Sensor Pad/movement function
Please Note: if the Sensor Pad/Movement function is already activated from switching on the Camera Unit you have 20 seconds to complete the following before the movement alarm sound (loud continuous beeps from both units) sounds:
Power ON the Parent & Camera Unit
Press the MENU icon on the Parent Unit screen
Press the arrow down on the right until you see the Sensor Pad/Movement function icon
Press OK to enter the setting
Press OK and the toggle in the top row for activating deactivating the Sensor Pad/movement function will light up;
to activate the movement function the toggle must be BLUE
to deactivate the movement function the toggle must be GREY
Once you have selected your preferred setting press the arrow down until the save icon at the bottom turns BLUE
Press OK to save your preferred setting and the save icon will disappear
Press the arrow back on the left to return to the video display
when the movement function is activated you will see a plug icon in the top left of the display
when the movement function is deactivated you will not see a plug icon in the top left of the display
Comments
0 comments
Article is closed for comments.