AC401 / AC403: How to: change the channel to bypass interference

You can change the channel as follows:

• Turn both Parent and Nursery unit ON
• Press and hold the SELECT button on the Parent Unit until you hear a beep and the display shows either C1 or up to C8
• Press the UP or DOWN arrow buttons to select another channel
• Press and release the SELECT to confirm the channel
• Quickly press the EXIT button on your monitor which saves your settings - do not hold the power button as the Parent Unit will power OFF and you would need to begin again

PLEASE NOTE - You must carry out the last 2 steps to save your new setting or your monitor will revert to the previous setting