AC417: Connecting replacement parent unit

Firstly, you will need to remove the battery from the the original Parent Unit:

· Switch on the Camera Unit & replacement Parent Unit

· Tap the Settings Icon in the Parent Unit screen to open the Pairing screen

· Press the + for camera 1, this will now turn blue

· Whilst the + icon is still blue press the Pairing Button on the top of the Camera Unit for 2-4 seconds and release

· The + icon in camera 2 will now show as a Red Bin Icon

When you see the red trash can icon show on screen pairing is complete

________________________________________

You will also need to connect the Sensor Pad to your replacement Parent Unit:

________________________________________

· Power ON the Camera & Parent Unit and press the settings icon on the Parent Unit screen

· Press the pairing icon (bottom left icon) to enter pairing menu

· Press and hold the blue cross in the top Sensor Pad row until it turns to a blue circle

· The green power light on the Parent Unit will flash slowly to indicate connecting

· A RED bin will appear

This indicates that the Sensor Pad is now paired