Switch on the original Camera, additional Camera & Parent Units
Tap the Settings Icon on the Parent Unit
Tap the Pairing Icon
Tap the Camera/Pencil Icon
Press the + for camera 2 and this will turn blue
Whilst the icon is still blue press the Pairing Button on the top of the Camera Unit for 2-4 seconds and release
The + icon in camera 2 will now show as a Red Bin Icon
This indicates that the pairing is complete
IMPORTANT:
- You can add up to an additional 3 Camera Units - these can be purchased directly from the Angelcare UK webshop (AC Adaptors & wall/table mounts are not included but are also available)
- It is not possible to add additional Sensor Pads to any Angelcare Monitor
- When monitoring movement, the Sensor Pad can only be connected with CAM 1 and no other Camera that has been added
- The display is split screen
- Should you be monitoring movement on CAM 1 but another Camera is highlighted in the info bar on screen the alarm will only be heard from the Camera Unit - though this is loud
- When monitoring sound, it is not possible to hear sound from all units at the same time. Sound can only be heard from the Camera Unit highlighted in the info bar. This can be manually changed as & when required
Comments
0 comments
Article is closed for comments.