AC401 / AC403: how to activate and deactivate the Sensor Pad

Activating Movement:

• Plug the Sensor Pad into the back of the Nursery Unit - this must be done in order to activate/monitor movement
• Switch both the Nursery Unit and the Parent Unit ON
• Press the MENU button on the front of the Parent Unit once and release
• You will see the Sound Function (Speaking face) Icon flashing in the top right hand of the Parent Unit screen:

Press either UP or DOWN button on the Parent Unit (underneath the screen) until you see the “Tic Function (Pendulum), Sound Function (Speaking face), Movement Function (3 wavy lines) Icons flashing in the top right hand of the Parent Unit screen

Please Note – if you do not wish to hear the movement TIC through the Parent Unit indicating that baby`s movements are being detected do not highlight the Tic Function (Pendulum) Icon

• Press SELECT to confirm your choice
• Press EXIT to SAVE your choice

PLEASE NOTE: You must complete the last 2 steps above – if you do not the setting will revert to the previous and you will need to start again.

Deactivating Movement:

• Plug the Sensor Pad into the back of the Nursery Unit - this must be done in order to deactivate movement
• Switch both the Nursery Unit and the Parent Unit ON
• Press the MENU button on the front of the Parent Unit once and release
• You will see the Tic Function (Pendulum), Sound Function (Speaking face), Movement Function (3 wavy lines) Icons in the top right hand of the Parent Unit screen:

Press either UP or DOWN button on the Parent Unit (underneath the screen) until you see the “Tic Function (Pendulum), Sound Function (Speaking face), Movement Function (3 wavy lines) Icons flashing in the top right hand of the Parent Unit screen

Please Note – if you do not wish to hear the movement TIC through the Parent Unit indicating that baby's movements are being detected do not highlight the Tic Function (Pendulum) Icon

• Press SELECT to confirm your choice
• Press EXIT to SAVE your choice

PLEASE NOTE: You must complete the last 2 steps above – if you do not the setting will revert to the previous and you will need to start again.

You can now unplug the Sensor Pad from the Nursery Unit and store away for future use.