Re-connecting your Nursery Unit & Parent Unit
• Switch the Nursery Unit and Parent Unit OFF
• Slide the connection switch on the back of the Nursery Unit to position 1
• Switch the Parent Unit ON
• Hold the Talk button (on the side of the Parent Unit) for 2 seconds, the Nursery Unit Icon will show on the screen
• Press the Nursery Unit Icon on the screen until it flashes (this is connectivity mode)
• You will need to carry the following steps out within 1 minute or the icon will cease flashing and you will need to start the process again
• Switch the Nursery Unit ON
• Quickly press the power button (left wing) on the Nursery Unit 4 times and release – the power light will start to blink
• After approx. 10 seconds the Parent Unit screen will briefly display a H1 or H2 followed by the normal screen
Your Parent Unit & Nursery Unit are now connected.
Comments
0 comments
Article is closed for comments.