AC215 - How to Connect your Parent Unit and/or Camera Unit - whichever is replaced:
For replacement Parent Unit only install the battery provided separately - see attached PDF below
Switch the Parent & Camera Units OFF
Switch the Camera Unit ON
Press and hold the Pause button on the Camera until the green Power Indicator Light blinks and then release
Switch ON the Parent Unit
Once the Angelcare logo disappears off screen PRESS & KEEP HOLD of the Zoom Button on the Parent Unit
Whilst still holding down the Zoom Button quickly PRESS & RELEASE the Power Button on the Parent Unit
Please Note: Do not press the power button for too long as this will switch the Parent Unit OFF and you will need to begin again
Now release the Zoom button
When completed you will see the video display on screen
Comments
0 comments
Article is closed for comments.