AC25-1: The video display on my screen goes off after a short time

You have the option to:

Set a timer so the screen displays for 30 seconds, 1 min, 2 mins, 3 mins, before going into screensaver mode - blank screen

NOTE: if sound is detected from baby, the display will auto show for the set times you set as above before going back into screensaver mode - blank screen

OR

Have the video displaying constantly

Note: as with any video device, this can drain the battery power so we would advise to connect to the power when using this option)

To check, change the setting:

Enter the Main Menu settings on your display, press the right arrow button and tab to and select the settings icon

Press the right arrow button and to tab and select the screen save icon

Press the middle button and tab to, enter the VOX VIDEO settings

Use the UP/DOWN button to select your preferred display choice that will show under the VOX VIDEO ICON:

30 (seconds), 1 (minute), (2 minutes), 3 (minutes) or OFF (continuous display on screen)

Press the left arrow button and tab left to the MAIN MENU / SAVE SETTING ICON and press the middle button to save your preferred setting.

A green tick will display for a couple of seconds to confirm that the setting has been saved.