Firstly, if you are replacing one of the units - place the unit that you are replacing away to prevent any confusion.
Make sure that the Parent & Camera Units are both powered OFF & next to each other before starting this process.
Now, power ON the Parent Unit & press the MENU button
Keep pressing the right arrow on the MENU button until you highlight the Pairing Option Icon
Click the MENU button
Press the MENU button to select the Camera that is not connected
The linking icon will show as follows this indicates that the Parent Unit is now in pairing mode
Now power ON the Camera Unit
Press & hold the pause button until the LED light above the power button starts to flashing & release this indicates that the Camera Unit is now in pairing mode
Once connected, you will se a green pairing icon and the Camera Unit you were connecting will have an OK next to it
If this fails, repeat the process again
Comments
0 comments
Article is closed for comments.