1. Tic LED:
When activated the Green LED blinks steadily: this is a visual indicator showing that the movement function is ON and the Sensor Pad is detecting your baby's movement.
If the LED is Light blue (not green) : the Parent Unit battery is charging.
Steady green for 15 seconds then unit will turn OFF: the battery is fully charged.
2. Power LED:
Steady green: indicates that the Unit is receiving power, is ON
3. Sound Level LED’s:
Flashing Green light: indicates that sound is being detected by the Nursery Unit.
4. Zoom button:
When the zoom mode button is pressed, to adjust the area you wish to view, use the left arrow to enter into PAN & TILT mode:
Then, utilise the direction buttons to zone in on the area
6. 7. 8. & 9. Direction buttons:
Press the down and up arrows to control the speaker volume level:
Press the left and right arrows when changing any settings in the MENU:
Use, press all the arrows individually to PAN & TILT the zoom on the object desired area:
12. Power ON/OFF Button:
Press and hold for 5 seconds to power the unit ON or OFF:
To turn the display off (the unit is still powered ON) - quickly press and release the the power button.
This feature works if you have selected sleep mode on from a setting in the Parent Unit. When, if you want to see the display again, press any button.
17. Reset Button:
Use a straightened paper clip in the reset hole to reset the unit.
Comments
0 comments
Article is closed for comments.