Firstly, you will need to delete the original Camera Unit from the monitor:
· Switch on the original Camera & Parent Unit
· Tap the Settings Icon to open the Pairing Screen
· Press the RED BIN for camera 1 and a red tick will show next to the RED BIN
· Press the tick and the RED BIN will be replaced with a blue +
· Power OFF the original Camera & Parent Units
Once deleted or if there was no RED BIN showing you can connect the replacement Camera Unit to your Original Monitor:
· Switch on the Parent Unit & replacement Camera Unit
· Tap the Settings Icon in the Parent Unit screen to open the Pairing screen
· Press the + for camera 1, this will now turn blue
· Whilst the + icon is still blue press the Pairing (pause) Button on the top of the Camera Unit for 2-4 seconds and release
· The + icon in camera 1 will now show as a Red Bin Icon
When you see the red trash can icon show on screen pairing is complete
Comments
0 comments
Article is closed for comments.