AC517: How to: replace the Wireless Sensor Pad

Before beginning the connection process remove the battery from the original Sensor Pad

Power ON the Parent & Camera Unit

Deactivate movement in the Sensor Pad in the Sensor Pad setting

When the toggle is grey = deactivated

When the toggle us blue = activated

Press the back arrow to return to main setting screen

Press the bottom Pairing Icon

If there is a red bin in the top Sensor Pad row, press this icon

A tick will show next to the red bin

Press this tick and the red bin will change to a blue+

If there is no red bin or once you have deleted this, place replacement battery into replacement Sensor Pad

Press and release the blue + in the top row that shows the Sensor Pad icon

The Outer circle containing the + will also turn blue 

Your Parent Unit is now in pairing mode. NOTE: this part of the connection process can take approx. 6 – 12 seconds to complete

Once completed a red bin will show in the top row and the wireless Sensor Pad icon will show in the information bar

If this fails repeat the process

When the replacement Sensor Pad is set up in the cot and you are ready to monitor movement; reactivate the movement function in the Sensor Pad setting on the Parent Unit

When the toggle is grey = deactivated

When the toggle us blue = activated