AC210: How to: connect a replacement Parent and/or Camera Unit to your existing Monitor

• Turn the Camera Unit & Parent Unit OFF
• Turn the Camera Unit ON
• Press and hold the pause button for approx 5 seconds - the green power light will start to flicker for approx 15 seconds

the following steps must be carried out whilst the power light flickers - if this stops before completing begin again

• Switch on the Parent Unit
• When the Angelcare logo disappears press and hold the zoom button the Parent Unit for a few seconds
• You will see 4 Camera Unit Icons and  +  - showing on screen
• Press the Menu Select button to select Camera 1
• Press the UP arrow to select + and press the Menu Select button
• The Parent Unit may display a forward icon during the reconnection procedure - once connected the display will show on screen