AC401:adding / reconnecting second Parent Unit

Note this option is only available on the AC401 model

If you want to add/connect or reconnect a second Parent Unit see the following:

• Keep the first Parent Unit and the Nursery Unit ON
• Switch the second Parent Unit ON
• Press and hold the PAIRING Button on the front of the Nursery Unit (this is the clear white button under the halo night light) until a beep sounds and the TIC light starts flashing - then release
• If successful, there will be a third beep and the 2nd Parent Unit will now show the channel number, which will then be replaced by the standard menu screen - this means that the unit is connected

Please NOTE: you need to operate your Parent Units on different channels to reduce interference - see the following for advice:

To change the channel:

• Turn one of the Parent and Nursery Units ON
• Press and hold the SELECT button on the Parent Unit until you hear a beep and the display shows C1 to C8
• Press the UP or DOWN arrow buttons to select a different channel
• Press SELECT to confirm the channel
• Press the EXIT button on your monitor which saves your settings

PLEASE NOTE - You must carry out the last 2 steps to save your new setting or your monitor will revert to the previous setting