Switch on the Camera & Parent Unit
Tap the Settings Icon to open the Pairing Screen
Press the Red Bin to see a tick appear next to this icon
Press the tick/Red Bin Icon - this icon will disappear and + will show in its place
If however there is no red bin:
Press the + on the Parent Unit and this will turn blue
Whilst the + icon is still blue press the Pairing Button on the top of the Camera Unit for 2-4 seconds and release
The + icon will now show as a Red Bin Icon indicating connected
Press the return arrow twice to return to the main screen
For short videos on this see the following:
Comments
0 comments
Article is closed for comments.