The AC527 allows you to add a second Nursery / Camera Unit. See the following procedure for how to pair this to your Parent Unit.
- Press the screen of the Parent Unit to access the menu.
- Press the Setting function
- Press the Pairing menu
- Press the Nursery Unit 2
.
-
The linking icon will appear on the screen
-
Turn ON the Nursery / Camera Unit and press and hold its “pause/pairing” button until the power LED starts flashing while pairing
-
If the connection has been made, the Green Successful Pairing Icon will appear on the screen and the menu will show the OK Paired Icon
-
Otherwise, the Red Failed Pairing Icon will appear on the screen. You will need to try again
IMPORTANT:
- To customise the settings of your additional Nursery / Camera Unit, make sure the CAM2 is selected and broadcasting sound
- When using two Nursery / Camera Units, you will only be able to hear audio from one Nursery / Camera Unit at a time (Nursery / Camera Unit sound transmitted is highlighted in the info bar).
- In split screen, the sound transmitted from the Nursery / Camera Unit will be indicated on the screen by a speaker icon shown to the right of the CAM icons
You can easily switch the viewing camera by using the View Mode button on your Parent Unit. Just select the preferred Nursery / Camera Unit or the split view.
In split view, you can change the broadcasting Nursery / Camera Unit sound with the Switch Nursery / Camera Unit sound button of the Parent Unit
Below is a video that shows you how to change the nursery / camera view mode - this is the same for the AC327, AC337 & AC527:
Comments
0 comments
Article is closed for comments.