AC327 / AC337: How to connect a replacement Parent or Nursery Unit to your existing monitor

This information is the same as if you were to ever have to reconnect the Parent and Nursery Unit due to a loss of connection:

1. Switch ON the Nursery Unit & Parent Unit
2. Press the Menu Icon
3. Select the Setting function  and press the Menu button
   
   
4. Select the Pairing menu   and press the Menu button
   
   
5. Select the Nursery Unit 1  and press the menu button
   
   

6. The linking icon will appear on the screen

7. Turn ON the Nursery Unit and press and hold its “pause/pairing” button until the power LED starts flashing while pairing

8. If the connection has been made, the Green Successful Pairing Icon will appear on the screen and the menu will show the OK Paired Icon 

9. Otherwise, the Red Failed Pairing Icon will appear on the screen. You will need to try again

Here is a video that shows you how to connect the Parent Unit with the Nursery Unit:

________________________________________

You will also need to connect the Sensor Pad to your replacement Parent Unit:

1. Remove the battery of the Sensor Pad

2. Press the Menu Icon

3. Select the Setting function  and press the menu button

4. Select the Pairing menu  and press the menu button
   

Select the Sensor Pad 1  and press the menu button

The linking icon will appear on the screen until Successful Pairing Icon appears on the screen.

1.  Insert the battery into the Sensor Pad. It will automatically activate the Sensor Pad.

2. If the connection has been made, the Green Successful Pairing Icon will appear on the screen and the menu will show the OK Paired Icon 

3. Otherwise, the Red Failed Pairing Icon will appear on the screen. You will need to try again

Here is a video that shows you how to connect the Parent Unit with the Sensor Pad: